Monday, 5 May 2014

Virtual Online Gallery Space 2

Revised Design

As previously mentioned I have been experimenting with the virtual online gallery space software called Exhibbit. I have been producing different designs using the software and it has proven very tricky to actually find a suitable way of organising my photograph to produce a visually sound professional standard exhibition. I originally thought that it would have been some what easy to work with the space within the software however it was hard to scale the images right to fit in the room space. This was tricky for me since I have only produced two exhibitions in the past. I have been able to overcome this and have worked at designing a more suitable design than I originally produced. 

I noticed that the images looked too small when on the large wall, I knew that I wanted the images to be size A1 in order to give the viewer enough scale to appreciate each crisp highly detailed photograph. I then decided to make the size of the images bigger on the walls, this caused me to then have to move onto the next wall space in order to fit all of the 9 images in. I initially intended my images to be on one long straight wall however this is sometimes hard to find in some galleries. This gave me great experience with overcoming possible difficulties that may arise when producing the final show so this is a good way to learn certain lessons! I would still very much like to have my images all on one long wall, this would flow better and I think that with the work spread between two walls the work can sometimes loose the flow and this can affect the viewers experience. The software that I have been using is basic and you are unable to change certain aspects of the exhibition, because of this I have decided to try out another piece of software in order to possible produce a better design. I downloaded a similar piece of software called VAS Virtual Art Space, this seems to have a little more choice than Exhibbit and I am pleased with the ease of this software. Below is another design that I have produced using this new software, I tried to iron out and wrinkles in my initial design.

When stating the size/ dimensions of the space that I require at the final show, I requested that I have enough wall space to fit 9x A1 Images, this size is likely to be the final size of my images unless I am advised by staff that the space that I require may not be available. If this is the case, I will get the prints made at A2 size, only as a last resort. It is a big part of my project that these images are of a large scale, the critical underpinning behind this being that my work is a praise and the scale of the images can reflect this, they will be grand and well printed with abundant detail. 

I noted in the request form that I required the following: I will require existing wall space to display 9 x (23.4" x 33.1") (A1 Size) prints. A mixture of both landscape and portrait orientation with ample space separating each image.

We were also asked to write a short sentence to summarise what our individual work is about, mine read as follows. 

"Many years of experience in the metalworking industry unveiled a strong appreciation of the skills and techniques that have been passed down through generations. The remaining forges that continue to utilize these techniques are in decline due to an increase of products being imported into the UK. These photographs are part of an ongoing project, which aims to praise these talented engineers for their craftsmanship and passion for the work they produce. Fuelling and assisting these engineers are their food and tools, both of which have their own story to tell. The recipes and devices that give these men the means to carry out such physically demanding jobs are a vital part of life within the forge. Unique hand crafted tools have been passed down through families, from generation to generation and these photographs are a testament to a way of life that will soon be forgotten."


When I begun designing/ using the software on the VAS Virtual Art Space website, it became apparent that it took a long time to change anything or upload information or images using the software. It would take around an hour to create the exhibition and this wasn't practical for my work or progression. I then decided to continue using the first software that I found because I had started getting used to that and it was much quicker. 
Below is another design that I have produced using the Exhibbit software, I tried to iron out and wrinkles in my initial design. I also wanted to create a design that would utilise only one long stright wall, as mentioned previously I think that if the sequence is broken by a different angle wall then it can disrupt the viewers attention/ experience. Below are some screen shots of the latest design that I have come up with. 





The above design is taking into account the fact that I may not have as much space as I would like to have in the final show due to size constraints. This is a very real situation and it is great to be able to have the chance to overcome this issue whilst at university and not when I have graduated. I will now produce one more exhibition design, I have noticed several things that I dont like about the latest design. The first thing that I dislike about the design is that the images are too close together, I have wanted a considerable gap between each image from the very start of this project. This is the most major downside of this design and I will now adapt this to be more suitable. I will go back to the initial design and use the idea of using two or more walls to enable me to have enough space separating the images whilst keeping the size of each print the same. I know that using more than one wall goes against my initial idea but I believe that if possible, I will use just one wall in my final show. So the one wall design will be the chosen design that I will submit and use at the final show as long as I have enough space to display them. I will however still design another layout out of curiosity to see if it works better by breaking the images us using another wall. Below is the last design that I produced, it works really well once I had a play around with scale and positioning, I may even use this design to submit for hand-in. 

I would also include my artist statement/ introductory statement at the beginning of the prints, A4 size.  


It was important that the exhibition looked equally proportioned and spaced out, however having to split an odd number between the two walls proved difficult and therefore I had to compromise on the spacing with the first 3 prints. 



I am pleased with the way that the designing has come out, I know that this is only a rough design because we have not been given the final spaces that we will be allocated for the final show yet. I am confident about the size of my final prints, it is just the layout on the one wall design that I cannot successfully put across through this software. Therefore, I am going to submit both of the designs for submission.



No comments:

Post a Comment