Thursday, 1 May 2014

Final Presentation

I have decided that I am going to change the method of hanging my prints for the exhibition. I initially begun researching into the standard framing and mounting method that many other photographers have used in the past, I wanted to put a unique twist on the design and have come up with a perfect way to do so.

After recently attending several exhibitions, I started to look out for and notice the way in which other people had exhibited their work and how they had hung their work. I then remembered back to a metal work project that I helped to complete at the forge, the brief was to produce several hundred screw in metal wall hangers for art work in a gallery. The basic design of the hanging device was an aluminium built piece of metal with a cut out in which a piece of art/ photograph could be slotted into. Each piece of art on the wall would have 4 of the metal hanging devices in order to display it on the wall of a gallery. I have decided that as a way of incorporating the practical work that is done at the forge, I will make each of my own wall brackets for the final university show. I am excited to begin designing and making the brackets for my own work, I will now focus on sourcing the materials including the aluminium and the glass or plastic that goes either side of the photograph. 

I have photographed a similar style of wall bracket that I noticed at my university building, below are some photographs from that design. I may well use these photographs in order to change the design that the forge already has for the brackets. 





It was great to see a similar design to the brackets that we make at the forge and it sparked a real great way of involving the forge practically. Below are some pictures that I took of the brackets that we produce for the arts company, our design is made purely out of one piece of aluminium bar and then milled down on a milling machine for the slot part. One end of the piece of aluminium is then smoothed off on a lathe by hand and then a countersunk hole is drilled into the other end using a tapping chuck on another part of the lathe. 






The photographs above are taken of the test/ setting piece, a prototype of the final product therefore they are not as well finished as the ones that I will make for my project. They are a sleek design which would really suit my final prints!



No comments:

Post a Comment