Thursday, 8 May 2014

Self Evaluation Report

Below is the 1000+ word report/ self evaluation that we were asked to produce to go alongside out body of work. I really enjoyed writing this piece of text as it allowed me to reflect and think about my choices!


Report
Ben Stokes
“Tools of The Trade”



During the advance research strategies module I researched into my chosen subject matter, which enabled me to produce a project proposal for my negotiated final major project. My photographic style at the time of producing the project proposal was surrounding real life portraits of engineers from different areas within the United Kingdom. I initially intended to continue this work for my NMP using portraiture as my medium of doing so. From past research in other modules and through further research during the ARS module I began to delve in-depth into my chosen subject area. I have always been interested in the praise of the declining metalworking industry within the country and this project was focusing on just this.

During a one-to-one meeting with a tutor, I discussed my proposal and how best to develop the project. It became apparent that although I had initially intended to produce a number of “real life” portraits, it was my still life photography that held the most strength and it was proposed that I focus upon that to develop an area of my photographic practice that needed further development and focus. This gave me an ideal opportunity to challenge myself in working outside my usual style and I was enthusiastic to begin experimenting with still life photography. The idea ignited upon presenting to a tutor a number of my archive images that were surrounding the praise of engineer’s concept. The tutor noticed something within this work that would work well for my NMP and together we decided that my proposal would change to incorporate the still life photography. Below is the archive image that I presented to the tutor at the one-to-one meeting; it was taken at the forge at which I have worked at for over 5 years.
  
I began photographing straight away having always found this the best way to gather ideas and to develop a style for a project. At this point my project was in need of its own unique impression on the overall theme of the praise of engineers.
I therefore decided that I would focus upon one aspect of life within the forge itself and by delving into and unpicking each archive still life photograph it enabled me to decide upon the focus for this project. Through experiencing life first hand within the forge I had a greater understanding of the industry and how it has been on a journey for many years. One element of the trade that has remained similar throughout the years is the basic elements that enable the engineers to function, be that the food they eat or the tools that they utilize. I began photographing at the forge several times with this idea in mind and I collected many diverse and interesting images whilst doing so.

The next stage of my project was further research, and due to changing my idea from what was initially suggested this research was vital. In particular, I took great influence from Chris Harrison who similar to myself used photography to capture elements of the industrial past. I have found it extremely useful to see how other photographers go about photographing a similar subject; Harrison has been a great influence of mine in what he chooses to photograph and how he goes about this. I continued to research and apply what I had found out to my project on a regular basis, which enabled me to perfect and create a diverse series of photographs.

The editing down of my vast amount of images was crucial, I needed to identify a specific aesthetic style to push forward and perfect. During a feedback session with Moira Lovell and David Oates, I was able to distinguish the chosen aesthetic for my final set of photographs. The chosen aesthetic was minimal, with a plain background that isolated out the subject in the middle of the photograph, similar to my “real life” portraits of the men who utilize such items in the photographs. This isolating method has been influenced by my work surrounding the use of the dead pan aesthetic and has been enhanced by my meticulous personality, which helped to work well with how food photography is so fastidious in the present day. From my research it was obvious to see that as mentioned above, the food photography industry has exceptionally high standards in terms of the final outcome. This influenced me to produce high quality perfectly turned out photographs for my final edit. I re-shot some photograph set up’s in order to maintain this high standard that was expected for my final major project. Throughout the project I tried to keep the learning outcomes and module aims in mind to make sure that I produced a professional quality body of work that would be of marketable quality.

Undertaking vast amounts of research into the presentation of my final photographs I have been able to understand what it takes to produce a professional quality exhibition worthy project. I now understand the hardship that a photographer goes through when designing and putting together an exhibition. I have taken into consideration each individual element of presentation, from test prints and picture quality to framing and mounting of the final product. I believe that this has been a massive learning curve for myself and I have begun to understand the work ethic, drive and passion that are needed to be successful within the photographic industry.
I put the viewers first when deciding certain presentation elements, which has showed me that it is necessary to do so in order to create an impacting and memorable exhibition. I decided that the final name for the body of work would be chosen during the closing stages of the project, this has enabled me to develop a name that suits my final photographs well and which summarizes what they are about. The chosen name for the project was “Tools of The Trade” which comes from the fact that the food and the tools are both actual “tools” that are utilized and they both have their own history within the industry.

I have noticed myself being taken on a journey throughout this project, I have been able to notice myself changing my idea naturally and I have let the project take its own course which has brought me out with a body of work which looks professional and puts across my initial ideas successfully. Other students and tutors have picked up on how naturally my idea has progressed and developed, this way of project development will now come into its own now that I have more time to finish future projects after I leave university. Another area of my professional practice that I have been able to develop during this project is the ability to talk to others about my photographic practice whilst also taking on board constructive criticism in a profession manner. The development of an Artist Statement has also been very beneficial for my future work as it enabled me to practice talking about my own work in a critical and professional way. I have also incorporated the use of a real life project budget, which I have been able to stick too so far; this has been great practice for when I have to manage my own projects in the future. Identifying my target audience early on in my project was beneficial to my work as I was able to keep this in mind when photographing to again produce a professional quality body of work. Finally, one element of the exhibition design has benefitted the body of work greatly, the decision to include wall brackets that are made at the forge at which I have been photographing has given a real sense of praise for the work that the engineers do there.

The project has enabled me to focus upon one area of photography that I may not have been able to devote time to in the past and I believe that from doing so I have opened a new doorway in terms of my professional progression. The food photography industry is a competitive industry to thrive in however after this project I believe that I would be able to do so in a successful manner in the future. The photographs that I have produced for this project will stand as a testament to the rapidly declining metal working industry in this country. The photographs successfully fulfill my intentions and allow others a unique insight into an industry that will one day be extinct.



Exhibition Justification Statement

Below is a short piece of text that justifies my choices made when designing my virtual exhibition with the intention to design my final show in the same way. 


Statement


The layout of an exhibition is of great importance to me, I believe the viewer should be taken into account when deciding each individual element of the design.

I start by talking about the order of the photographs, something that took a great deal of time editing down and deciding which image to place in which order. Through a number of different editing sessions both with other photographers/ peers and also by myself, I was able to use test prints to experiment with the order of the photographs. This was a very worthwhile exercise as it enabled me to become better educated in how to order a body of work more successfully. It is important that whilst editing down to the final set of images that a photographer gets other peoples opinions, these opinions can bring new ideas or ideas that the photographer might not have seen initially. Physically printing out the test prints enabled me to visualize the photographs as a sequence and it was easier to decide the order from doing so. The photographs needed to have some sort of continuity about them, many exhibitions that I have visited have considered the way that a viewer reads a body of work. I therefore decided to use one landscape-orientated image followed by a portrait image and so on, this gives the viewer a reoccurring pattern.

Using the virtual online exhibition software, Exhibbit, enabled me to visualize my work as if it was being hung on a gallery wall. This was a great experience as it enabled me to practice how I would like my photographs to be presented during the final show. The software had several downsides however; it was very basic and only enabled the user to make basic changes to the layout. From the very beginning of my assignment I decided that I would exhibit my photographs on one single white wall with no separation by other walls, this was mainly due to the way in which the viewer would experience and read the images without being distracted. Although we have not been allocated a space for the final show as of yet, I have requested a long plain white wall so that I would be able to exhibit my images in one long sequence. I produced a mock up design using the software, the images of which can be seen within the folder named “DESIGN 1”. It is obvious to see that the images within this design are very close together, this is not how I will choose to exhibit my final prints, I intend to have a larger are of white space separating each image. The final 9x A1 size images would not have been able to fit on the wall within the Exhibbit software and the user is unable to change the size of the space. This design does however show how I intend to display my final images once I am given a longer wall at the final show.

As a precaution, and incase I am not allocated a single long white wall to exhibit, I have designed another layout using the software. The second layout can be seen within the folder named “DESIGN 2”.
This layout incorporates two different walls into the design and through designing this I have been able to practice the layout incase I am allocated 2 different walls or more. I consciously decided to separate the images onto two walls so that they looked equal, the two landscape orientated images either side of the portrait orientated image works successfully.

In terms of the framing that I will use for the exhibition, I have chosen to incorporate the forge into the production of the brackets that will hold my work onto the wall. I will encase each print within two clear A1 size pieces of Perspex/ acrylic sheet. This frame will then be attached to the wall by the brackets made by the engineers at Risley Forge, the company at which I have been photographing. This is a great way of incorporating the highly talented engineers work into this project, which is all about the praise of these men.

The scale of the prints has been of great importance to myself throughout this project, as the project is a praise of these engineers and their way of life, I intend to have large-scale prints. Due to the high quality photographs that I have produced, it enables me to have the images at size A1, which will give the viewer a chance to see the enormous amount of detail in each photograph. As mentioned on my blog, I have chosen to have  white boarder around each image to frame each image and enable them to stand out. The white boarder will be only a couple of inches wide due to personal preference.

I believe that the body of work along side the display choices that I have made for the exhibition will create a flowing and well designed exhibition that will give the viewer a professional quality experience.

The detail of each element of the design is shown in more detail on my blog,

Wednesday, 7 May 2014

Evaluation & Report

I am going to write a 1000 word report which talks about my project intentions and working process throughout this project. This will act as an evaluation and will allow me to reflect upon my journey as well as summarise everything that I have achieved throughout my final major project.

Paper Quality

Just a quick note... Leading on from my previous blog post about paper quality, I have decided that I will get my photographs printed in gloss finish. Standard gloss gives me the best of both worlds, there isn't as much light reflection as with high gloss but there is enough of a glossy look so that the image is clear and details can be picked up by the viewer.

Justification of Changes From My Initial Proposal

This post is surrounding the justification of the changes that I have made throughout this project, I have developed and changed my idea from the project proposal however I have also kept my work surrounding the same ideas/ concepts. I initially proposed to create a set of real life portraits of the people within different forges around the UK, this then changed due to me deciding that my work would benefit from moving away from portraiture and focussing on still life/ food photography. The main turning point for my project was when I had a one-to-one meeting with a programme leader who noticed that my still life photography was some what more interesting than some of my portraiture. I sometimes disregard my still life photography in the attempt to perfect my portraiture however in this situation it seemed right to take a different route for my final major project. I saw the FMP as a chance for me to really experiment with one aspect of my photography that needed some attention and as my previous project had been focussing on portraiture I decided to focus on the still life food photography as suggested. I am glad that I chose to change my route and my initial proposal because it has been very interesting to delve into this area of photography. 

Preparation Sessions

In the run up to the final show, we have been asked to attend sessions at university which are there to help our class make the right decisions for the final exhibition. The sessions will cover the following: editing, printing, framing, statements, name labels and production of postcards. I am looking forward to these session as I believe David Oates will be able to iron out any wrinkles that we each may have in our work before we start the final production of prints etc. 

Monday, 5 May 2014

Virtual Online Gallery Space 2

Revised Design

As previously mentioned I have been experimenting with the virtual online gallery space software called Exhibbit. I have been producing different designs using the software and it has proven very tricky to actually find a suitable way of organising my photograph to produce a visually sound professional standard exhibition. I originally thought that it would have been some what easy to work with the space within the software however it was hard to scale the images right to fit in the room space. This was tricky for me since I have only produced two exhibitions in the past. I have been able to overcome this and have worked at designing a more suitable design than I originally produced. 

I noticed that the images looked too small when on the large wall, I knew that I wanted the images to be size A1 in order to give the viewer enough scale to appreciate each crisp highly detailed photograph. I then decided to make the size of the images bigger on the walls, this caused me to then have to move onto the next wall space in order to fit all of the 9 images in. I initially intended my images to be on one long straight wall however this is sometimes hard to find in some galleries. This gave me great experience with overcoming possible difficulties that may arise when producing the final show so this is a good way to learn certain lessons! I would still very much like to have my images all on one long wall, this would flow better and I think that with the work spread between two walls the work can sometimes loose the flow and this can affect the viewers experience. The software that I have been using is basic and you are unable to change certain aspects of the exhibition, because of this I have decided to try out another piece of software in order to possible produce a better design. I downloaded a similar piece of software called VAS Virtual Art Space, this seems to have a little more choice than Exhibbit and I am pleased with the ease of this software. Below is another design that I have produced using this new software, I tried to iron out and wrinkles in my initial design.

When stating the size/ dimensions of the space that I require at the final show, I requested that I have enough wall space to fit 9x A1 Images, this size is likely to be the final size of my images unless I am advised by staff that the space that I require may not be available. If this is the case, I will get the prints made at A2 size, only as a last resort. It is a big part of my project that these images are of a large scale, the critical underpinning behind this being that my work is a praise and the scale of the images can reflect this, they will be grand and well printed with abundant detail. 

I noted in the request form that I required the following: I will require existing wall space to display 9 x (23.4" x 33.1") (A1 Size) prints. A mixture of both landscape and portrait orientation with ample space separating each image.

We were also asked to write a short sentence to summarise what our individual work is about, mine read as follows. 

"Many years of experience in the metalworking industry unveiled a strong appreciation of the skills and techniques that have been passed down through generations. The remaining forges that continue to utilize these techniques are in decline due to an increase of products being imported into the UK. These photographs are part of an ongoing project, which aims to praise these talented engineers for their craftsmanship and passion for the work they produce. Fuelling and assisting these engineers are their food and tools, both of which have their own story to tell. The recipes and devices that give these men the means to carry out such physically demanding jobs are a vital part of life within the forge. Unique hand crafted tools have been passed down through families, from generation to generation and these photographs are a testament to a way of life that will soon be forgotten."


When I begun designing/ using the software on the VAS Virtual Art Space website, it became apparent that it took a long time to change anything or upload information or images using the software. It would take around an hour to create the exhibition and this wasn't practical for my work or progression. I then decided to continue using the first software that I found because I had started getting used to that and it was much quicker. 
Below is another design that I have produced using the Exhibbit software, I tried to iron out and wrinkles in my initial design. I also wanted to create a design that would utilise only one long stright wall, as mentioned previously I think that if the sequence is broken by a different angle wall then it can disrupt the viewers attention/ experience. Below are some screen shots of the latest design that I have come up with. 





The above design is taking into account the fact that I may not have as much space as I would like to have in the final show due to size constraints. This is a very real situation and it is great to be able to have the chance to overcome this issue whilst at university and not when I have graduated. I will now produce one more exhibition design, I have noticed several things that I dont like about the latest design. The first thing that I dislike about the design is that the images are too close together, I have wanted a considerable gap between each image from the very start of this project. This is the most major downside of this design and I will now adapt this to be more suitable. I will go back to the initial design and use the idea of using two or more walls to enable me to have enough space separating the images whilst keeping the size of each print the same. I know that using more than one wall goes against my initial idea but I believe that if possible, I will use just one wall in my final show. So the one wall design will be the chosen design that I will submit and use at the final show as long as I have enough space to display them. I will however still design another layout out of curiosity to see if it works better by breaking the images us using another wall. Below is the last design that I produced, it works really well once I had a play around with scale and positioning, I may even use this design to submit for hand-in. 

I would also include my artist statement/ introductory statement at the beginning of the prints, A4 size.  


It was important that the exhibition looked equally proportioned and spaced out, however having to split an odd number between the two walls proved difficult and therefore I had to compromise on the spacing with the first 3 prints. 



I am pleased with the way that the designing has come out, I know that this is only a rough design because we have not been given the final spaces that we will be allocated for the final show yet. I am confident about the size of my final prints, it is just the layout on the one wall design that I cannot successfully put across through this software. Therefore, I am going to submit both of the designs for submission.



Sunday, 4 May 2014

Project Name/ Title

The name of a project and body of work is of great importance in my eyes as it helps to define the piece and it initially gives the viewer a taste of what the project is about. This said, it is also one of the hardest thing to do in a project, it has to be a considered short and catchy name that is both detailed and to the point. In previous projects, I have chosen to leave the naming part until the closing stages of the project because I find this the most worthwhile and beneficial way of working. I also find that during the closing stages of a project, one is able to look over the work that has been produced together with the motives and concept behind it and then you are able to develop a more suitable title. 

I have decided to stick with my way of finding a suitable title by choosing to only give the final name around the end of the project when it is all coming together. I now need to decide this and I have been brainstorming for several days about the best possible titles. I have also asked the men at the forge what they think I should call the project. I imagine the title to be something that is quite whitty, something with a bit of comic value possibly. This will mirror the humour within the forge well. I would also like the title to be a saying or group of words that the men within the forge use on a regular basis, maybe some slang word that means something to do with food and tools.  

Below are some of the suggestions/ my own ideas so far:

- Tools & Food
- Tools Of The Industry
- Fuel & Tools
- Tools Of The Trade (Personal Favourite)
- Food For Thought
- Tools & Fuel
- Sustenance 
- Snap, Tackle & Pop
- Fuel
- Steels On Wheels
- Through The Ages
- Inherent
- Necessities
- An Army Marches On Their Stomaches
- Down Tools
- Only Tools & Courses  

I received several rather tongue in cheek responses for the name of my project, I decided that I really don't want to have such a humorous name because I believe that it would contrast too much with the un-humours final images. Humour is one thing that I initially wanted to include within my images however it turned out that as my project progressed, it didn't seem right for me to do so. The humour within the forge could not be successfully portrayed within the still lives and food photography and will therefore give me another possible project to undertake after university.  

During the feedback session with David Oates and Moira Lovell we were also joined by the rest of my cohort/ class. This was a great opportunity for us all to look at each others work and to give each other feedback and also bounce ideas off each other. As mentioned in my earlier post, I left serval feedback sheets where people were encouraged to give any feedback about the work and how it could progress or even just to praise it which was great for moral! Below are images of the feedback sheets that I collected at the end of the session. There are some really useful points from my peers that I have worked upon. One of the the great pieces of feedback that I received was from many people, I asked on the sheet of paper which image out of two possible edits was the strongest and everyone chose the image that I also believed was the strongest which helped me to solidify my choice with that one. There were also little point which people picked up on and I took note of each of these feedback points and have been working on these points. The feedback session gave me a great drive to complete and excel over the remanding weeks!




After now asking several groups of people including the men at the forge, I have decided that I will take a list of my favourite names to the next feedback session in order to decide the final name. Personally I believe that "Tools Of The Trade" is the most suitable, I will gather others opinions of this. 

Saturday, 3 May 2014

Artist Statement

Below is my interim artist statement, it is currently a work in progress however it only needs some changes and checks. I will develop my statement after hand in and will have this statement shown next to my work in the exhibition as stated in my exhibition proposal.



Ben Stokes is a Manchester born social documentary photographer whose work has been constantly revolving around the praise of the declining metal working industry in the UK. This body of work, “NAME OF WORK” is a digression from his previous set of real-life portraits. His current practice is presented by still lives taken in and around the metal working forge at which he has worked at for over 5 years, working within the industry unveiled a strong appreciation for this line of work. This unique mixture of still life and food photography sets out to depict the basic elements that enable the talented engineers to function, be that the food they eat or the tools that they utilize.

The staple diets of the men who work within the forge are of great interest to Stokes, he brings special attention to the fact that the basic foods that the men consume have been passed down through generation’s. The food that fuels the men to produce such unique outcomes has remained the same as when miners used to take pasties and loaves of bread down the mines for energy as well as ease.

Inextricably linked to the food still lives are the tools within the forge that have been passed down through generations. Each of the tools within these photographs has their own story to tell, their own history within the industry and their own personal connections. The inscriptions on each of the implements help to show this personal connection and how some of the tools have been hand crafted for specific individuals.


The backgrounds chosen for each of the photographs gives us detail of just how hard and physically demanding this way of life is, each dent and scratch can be seen in high definition which helps to show the years of wear that the surfaces have been through. This body of work is a document, a way of our ancestors seeing how our country became one of the leading figureheads in the industrial revolution and how this industry has been taken on a journey from then until now.

Editing Down Session (David Oates)

This week we have been asked to attend a session with David Oates, the visiting professional photographer that has helped our class out on several occasions. I find it really useful to speak to David because as mentioned before, he is able to relate to my photographic subject matters for this project due to his upbringing.

This session will be to help finalise the final edit of images ready for the printing stages. We have been asked to bring a selection of final edits/ printing styles of the final photographs to gather feedback on each of the different elements. We have been asked to bring in full scale size images of how we imagine our final work being exhibited, I have chosen not to ring my full size prints in due to cost. I am not ready to send my 9 final photographs off to print yet and it would be costly for me to do a test print at that size. I have been and talked to my printing company and I am sure that my images will be suitable to be printed at the large scale A1 size that I want them to be. Therefore, I am going to take the A3 size prints that I took to the last editing down session so that he can go over my chosen final edit and see if he can offer any advice. 

Thursday, 1 May 2014

Final Presentation

I have decided that I am going to change the method of hanging my prints for the exhibition. I initially begun researching into the standard framing and mounting method that many other photographers have used in the past, I wanted to put a unique twist on the design and have come up with a perfect way to do so.

After recently attending several exhibitions, I started to look out for and notice the way in which other people had exhibited their work and how they had hung their work. I then remembered back to a metal work project that I helped to complete at the forge, the brief was to produce several hundred screw in metal wall hangers for art work in a gallery. The basic design of the hanging device was an aluminium built piece of metal with a cut out in which a piece of art/ photograph could be slotted into. Each piece of art on the wall would have 4 of the metal hanging devices in order to display it on the wall of a gallery. I have decided that as a way of incorporating the practical work that is done at the forge, I will make each of my own wall brackets for the final university show. I am excited to begin designing and making the brackets for my own work, I will now focus on sourcing the materials including the aluminium and the glass or plastic that goes either side of the photograph. 

I have photographed a similar style of wall bracket that I noticed at my university building, below are some photographs from that design. I may well use these photographs in order to change the design that the forge already has for the brackets. 





It was great to see a similar design to the brackets that we make at the forge and it sparked a real great way of involving the forge practically. Below are some pictures that I took of the brackets that we produce for the arts company, our design is made purely out of one piece of aluminium bar and then milled down on a milling machine for the slot part. One end of the piece of aluminium is then smoothed off on a lathe by hand and then a countersunk hole is drilled into the other end using a tapping chuck on another part of the lathe. 






The photographs above are taken of the test/ setting piece, a prototype of the final product therefore they are not as well finished as the ones that I will make for my project. They are a sleek design which would really suit my final prints!



Wednesday, 30 April 2014

Final Images

The new prints that I ordered recently have just arrived, this post will just show the new images within the final order that I want my work to be visualised in. 

Now the final series has come together, I am really satisfied with the outcome and I believe that this process and the outcome that it has produced has been the most professional and exciting project to date. 




One of the things that I need to focus on now is the size that I intend to print the photographs. From my research I know that I will have to make a decision as to weather I should print these images in either A1 or A0 size. Due to me now having the final amount verified I have been working out some prices and the A0 for the full 9 prints seems some what impossible given the budget that I put forward for the project. This makes me think that I may have to print the photographs at A1 size. I will now use the virtual online gallery space to visualise how the exhibition would look using size A1 prints. 

The below figures are based on an average priced printing company.

A1 Prints: £20x 9= £180
A0 Prints: £35x 9= £315

I will also try and get a discount from the printing company by asking them to sponsor the exhibition. In return I will have to display some sort of advertisement for the printing company at the event its self.