Wednesday, 30 April 2014

Final Images

The new prints that I ordered recently have just arrived, this post will just show the new images within the final order that I want my work to be visualised in. 

Now the final series has come together, I am really satisfied with the outcome and I believe that this process and the outcome that it has produced has been the most professional and exciting project to date. 




One of the things that I need to focus on now is the size that I intend to print the photographs. From my research I know that I will have to make a decision as to weather I should print these images in either A1 or A0 size. Due to me now having the final amount verified I have been working out some prices and the A0 for the full 9 prints seems some what impossible given the budget that I put forward for the project. This makes me think that I may have to print the photographs at A1 size. I will now use the virtual online gallery space to visualise how the exhibition would look using size A1 prints. 

The below figures are based on an average priced printing company.

A1 Prints: £20x 9= £180
A0 Prints: £35x 9= £315

I will also try and get a discount from the printing company by asking them to sponsor the exhibition. In return I will have to display some sort of advertisement for the printing company at the event its self. 

Artist Statement

It is necessary for me to develop an artist statement to go along side my final body of work and to help me to produce a separate short statement which talks about my projects intentions and working processes. Developing my critical written work has been an aim of mine throughout my last year at university. It has been of such relevance due to it being so important for my progression after university, when I intend to promote my work and organise exhibitions. 

Our peer group and a tutor recently had a session where we were made to write up a quick artist statement on the spot, this really pushed us students to cram in the most important information into the short paragraph. This was a great way of starting off the statement writing process as it enabled each of us to put across simply the basics and not to talk unnecessarily about other less vital information. When we had written down the short statement we had to then sit in two rows of students which we then projected what we had written to the person sitting opposite. We were then given feedback of the person and we moved onto the next chair where we were greeted by someone new. Before we swapped chairs, we had to make slight tweaks or changes to the statement to take out unnecessary information and to add in relevant information. This mean that we continually developed our initial statement until it resembled a professional standard artist statement. 

At the beginning of my final year, we were asked to do a similar exercise as the above, in a similar session plan to this also. The outcome of this session are below. These are the words that I built upon in the latest session. 




Below are images from my notes taken at the latest session. It is obvious that as the session went on, I developed my text more and more.




The text that I wrote during that session has really helped me to develop my semi-final artist statement, I will copy and paste my latest version below. 

--------------------------------------------------------------------------------

1st Revision

Many years of experience in the metalworking industry unveiled a strong
appreciation of the skills and techniques that have been passed down through generations. The remaining forges that continue to utilize these techniques are in decline due to an increase of products being imported into the UK. These photographs are part of an ongoing project, which aims to praise these talented engineers for their craftsmanship and passion for the work they produce. Fueling and assisting these engineers are their food and tools, both of which have their own story to tell. The recipes and devices that give these men the means to carry out such physically demanding jobs are a vital part of life within the forge. Unique hand crafted tools have been passed down through families, from generation to generation and these photographs are a testament to a way of life that will soon be forgotten.

--------------------------------------------------------------------------------

2nd Revision (346 WORDS)

Ben Stokes is a Manchester born social documentary photographer whose work has been constantly revolving around the praise of the declining metal working industry in the UK. This body of work, “NAME OF WORK” is a digression from his previous set of real-life portraits. His current practice is presented by still lives taken in and around the forge at which he has worked at for over 5 years, working within the industry unveiled a strong appreciation for this line of work. This unique mixture of still life and food photography sets out to depict the basic elements that enable the talented engineers to function, be that the food they eat or the tools that they utilize.

The staple diets of the men who work within the forge are of great interest to Stokes, he brings special attention to the fact that the basic foods that the men consume have been passed down through generation’s. The food that fuels the men to produce such unique outcomes has remained the same as when miners used to take pasties and loaves of bread down the mines for energy as well as ease.

Inextricably linked to the food still lives are the tools within the forge that have been passed down through generations. Each of the tools within these photographs has their own story to tell, their own history within the industry and their own personal connections. The inscriptions on each of the implements help to show this personal connection and how some of the tools have been hand crafted for specific individuals.

The backgrounds chosen for each of the photographs gives us detail of just how hard and physically demanding this way of life is, each dent and scratch can be seen in high definition which helps to show the years of wear that the surfaces have been through. This body of work is a document, a way of our ancestors seeing how our country became one of the leading figureheads in the industrial revolution and how this industry has been taken on a journey from then until now.

--------------------------------------------------------------------------------



I will continue developing my statement ready for hand in and will really try to produce a professional piece of work as possible. It has been great practice for my future career and I now feel more confident in writing and talking about my work and more specifically my current project. 

Tuesday, 29 April 2014

Time Management

Time management is an invaluable aspect of any project, especially a photographic project. At the beginning of this project I chose to focus on the time management of the assignment because I was cautious that it was such a big project and it had to be up to such a professional standard. I continued to stick to the planner that I produced in the ARS module and it helped me to structure my time more efficiently which in turn has helped me to be on time with my work and has enabled me to take time doing the work. I didn't want to be rushing this project in the last few weeks of the assignment because it is the last project that I will do at university and I want it to be the best. Although I have stuck to the timetable that I designed in the ARS module, I was unable to plan accurately just how long each of the different components for this module would take. By this I mean that it is only when I begun to start the assignment that I knew how long certain things would take. It did however help me to keep on track and for that I believe that it was worth while.

Photograph Captions

I have decided that I am going to go against the idea of having a caption and a name for each of the final images, after having a long hard think about what I would call each of the photographs I believe that it would be more beneficial if I was to not name them. The names that I would have given the images would have been just for the purpose of giving them a name. Sometimes I believe that giving a photograph a caption/ name can benefit the project but with this series I think the 1000 word report/ artist statement that will be at the beginning of the exhibition will give the viewer a greater understanding before they look at each image and then as the images as a series. The photographs speak for themselves, especially after the viewer has read the introductory statement at the beginning of the exhibition. 

Monday, 28 April 2014

Virtual Online Gallery Space

In order to visualise how my final series of images will work on the gallery wall, I will use an online piece of software that enables me to create a gallery space and to put my own images digitally onto the wall.

I used the online software called Exhibbit to visualise my exhibition.

The size of the room that I will be designing my layout for are indicated in the picture below, the user of the software is unable to change the dimensions unfortunately. 


Initial Mock Up Design





This online software is great for visualising your own work on the walls of a gallery but there are several downsides to using this free software, it doesn't allow for much change from the standard settings until you pay for the advanced version. Nevertheless I have had to work with this and have taken note on the things that I will do when designing the final exhibition layout.









It was my intention from the second that I chose the final subject of my photographic project that I wanted there to be one landscape image and then a portrait image to break the landscapes up, this inspiration and idea is taken form many of the exhibitions that I have visited during my photographic career. 





Throughout my work recently and in previous years, there has always been an element of uniformity within it. By this I mean that I have always preferred and routed for a very uniform and systematic approach to photography, this may have been from my reading and research into photographers from the Dusseldorf School of Photography, photographers who trained under Bernd & Hiller Becher. Their typologies have influenced my work greatly and coupled together with my slight obsessive tendencies I am always wanting flowing, precise and organised photographs. This uniformity can be seen in my exhibition layout, the images have to be precisely the same distance apart and are all placed at eye level of the viewer. This is another important element of exhibiting for myself, the work has to be at the right (eye height) to enable to viewer to examine the abundant detail that will be present in my photographs. Having the images also bring a sense of the viewer being on the same level as the subject and the photographer which is what I want to achieve. I wouldn't want the images to be too high so that the viewer would struggle to look into each image but not only that, it would seem as if the photographers and therefore the photographer would be looking down on the viewer. 

As I have not yet been allocated a space for exhibiting my work in during the final show yet, I have had to work around this and use this as experience and a test run to enable me to work with the given space when I find that information out. 

This mock up is in its early stages and I am sure there will be some changes to the design, I am unsure as to which online virtual gallery space we have to submit our work using but practicing with this software is great practice! I have also let my other peers on the course aware of this software and have sent links to them so that they can begin designing. 



Final Edit 1

This blog post is focussing on my chosen final set of images so far. I have finished all of my photographing so far and decided to get my work all printed out and set out on a table, I find that this is a great way to edit down photographs. I have continually used this method of editing down images, I find it to be the most successful way of finalising a body of work and I know that other photographers such as Chris Harrison uses this method. Below is a link to some really useful videos of Chris Harrison whilst he is working on the project, it really helps me to see how he works and how he edits down using the flowing project development method that I have used for this project.

http://www.youtube.com/watch?v=5uzFMOXFtKU

http://www.youtube.com/watch?v=WyGr3vJ2x4o&feature=share&list=SPBACGBbr1vZXtn_x_pYM1El86XispvOLn

 http://www.youtube.com/watch?v=gN6V_viksy8&list=PLBACGBbr1vZXtn_x_pYM1El86XispvOLn


http://www.nationalmediamuseum.org.uk/PlanAVisit/Exhibitions/CopperHorses/About.aspx


Below are some pictures taken when I placed the final set of images as I imagined them to be layout and read/ displayed. It takes a long time to think about how each other images will be read by the viewer, it is very important that you layout the images as if they are backing up your artist statement. This process has enabled me to have to think as if I were a member of the public looking at this project for the first time at a gallery or exhibition. Some people may not know about my body of work or the work that I have done before. This is another great point for my future progression as a photographer, I will be more practiced in putting together a considered and well planned body of work. 





The above images have blank pieces of paper to remind myself and help me to visualise where the images that I have not yet printed will fit in. The final set comprises of 9 photographs in total. I believe that the final body of images works very well and they are readable once the viewer reads the initial artist statement/ statement of intent. Within the 9 images, there are several images with metal as the main background, there are two images with the wooden background. This mean that I had to think about the way in which the wooden background images fit into the series, I had to make sure that it wasn't metal, wood, metal, wood because that would have been to obvious of a layout. I wanted the wooden background images to fit in within the metal background images, this was tricky! By introducing a wooden background image within the first 3 images, it gives the viewer a glimpse of the different background straight away and then a few more images on there is another wooden background image. The close up tool shots really break up the larger food shots and produce a coherent series, I believe that this well thought through photographs would work well in a gallery space. 

I will now design a virtual gallery space using an online piece of software, this will help me to visualise my final series on the wall of a gallery which will be a very proud and worthwhile experience I expect! Below are my chosen final images (LOW RES).










There are some slight colour changes that need to be done to each of the images, to get the colour of the metal the same shade/ colour.




Learning Process Expanded

In a previous blog post I mentioned how I have noticed myself going through certain cycles during my project, in terms of my ideas and what I want my focus to be. I talked of how I had changed my focus several times before coming up with my final chosen idea. Around two weeks ago, from the feedback session with David Oates & Moira Lovell I changed my idea for the final time. I was unsure on the final set of images, I had basically all of the photographs that I wanted to use but it was just a case of choosing which images worked well together in order to put across my idea successfully. 

As mentioned in my previous post about the feedback session titled "Project Feedback- David Oates & Moira Lovell", I decided to go back to including only still life photographs and food photographs focussing specifically on the tools of the trade and the food that the men in the forge consume. 

This realisation of what the final set of images will comprise of has really helped to solidify my project, it gave me a focus point which is great motivation. I am glad that I have let me project flow freely, it has really enabled me to come out with one of the best concepts and reasoning behind my work as well as enabling me to hopefully produce a body of work that shows how naturally my ideas have progressed. I hope to take this style of project development forward into my future career, this style of development really lends itself to spending much time on a project, something that I will be able to do when I finish university and embark on new personal projects. I am very excited for the future and have enjoyed this project greatly!

Saturday, 26 April 2014

Mounting & Framing

In previous exhibitions that I have been involved in, I chose to use foam board to back the prints due to ease, low cost and time scale. With my final major project, it was important that I produced the most professional looking images possible and displayed them in the same manner. For the hand in, I intend to put across how I have final chosen to display my images by writing a short piece of text that justifies my hang. I will first however blog about my research into how I finally decided the framing options for my project. 

I started off by researching into the standard style of framing prints. In previous exhibitions that I have attended I am always looking into each detail of the presentation so I am able to learn and take notes from it. I have always loved the look of matt black box frames with a relatively shallow back. I like the way the metal enables the image to stand out, especially with a white boarder around the image like the image below. 






The way that the dull black metal/wood contrasts so harshly with the white wall leads the viewers eye right into the centre of each image. The lighting has to be perfect to cast a shadow under the frame whilst making sure not to cause a reflection on the glass. I am also cautious as to the size of the white boarder around the images, I am not fond of the very thick white boarder as I believe it can often take something away from the image but I do think that a small minimal white boarder helped to frame and separate the image from the frame. 

The positioning is important to me also, I dont want my images being squashed together at the exhibition, I want there to be adequate room for each of my images to be viewed individually to give the viewer the full high detail experience. This, as mentioned before has something to do with my perfectionist personality also. 

Below are some of the frames that I have found that are suitable and of the right size. A1 frames can be rather hard to find!

http://www.ikea.com/gb/en/catalog/products/70167464/

https://www.tradeframes.co.uk/acatalog/A1_FRAMES.html








I will continue to look around for other frames or ways of presenting my final images. 

Post Production

Throughout this project so far, I have been trying to develop and learn new editing skills and techniques. This post is based on some editing that I have done during the closing stages of this assignment. 

Original Image


Edited Image 


The two above images show just how important post production is, it allows to create a professional outcome from the Canon 5D. I sometimes dont see how much the image needs editing when it is shown on the small screen behind the camera, when the image is viewed on a monitor you can see how sometimes, each element of the image needs to be tweaked. 

In order to get a set of images that were visually coherent, I decided to make use of the auto contrast, auto colour and auto tone. I have never used these settings in Photoshop because I always thought that it was a bit of a cheat however after experimenting with these elements, I have been able to really see just how useful they are. It allowed me to get similar looks throughout my images which gives for a more professional quality body of work.

When viewed on the computer, the metal table background for the image seemed to have two different colour tone casts. This was from using a mixture of both natural light and light from a modelling lamp. Usually, I might have let the slight light difference slide but for this project, I wanted to try my hardest and really get to grips with using Photoshop. I can now say that through editing photographs during my last year at university, I have really excelled and now feel more comfortable with post production. 

The above images look totally different and I think that it is amazing how impacting post production can be! I will continue to look forward to editing my future projects now and am enthusiastic about learning more and more post production skills. 


Tuesday, 15 April 2014

Project Feedback- David Oates & Moira Lovell

Myself and my cohort were invited into a university building to display our projects so far and gain feedback on how we could progress with our work. I was initially very happy about this meeting/ session because I knew it would give me lots of ideas to think about and loads of different peoples opinions so that I could progress. I always find getting other peoples opinions to be very worth while, I think that if you are looking at your own project for a long amount of time then you can get some what lost in it and you begin to go off on a different path. Getting others feedback and conversing with others about your intentions enables you to see things within your project that you may not see or realise after looking at it for so long. 

I really wanted to give this feedback session my all, I decided that I would use some of my given budget to get some prints done for the session. I chose to get around 20 images printed, this was a mixture of everything that I had been shooting at the forge, from still life food photography to portraits of engineers, this series of images combined everything. It was important that each photographer showing their work at the session had something that they wanted feedback on, or help with. I was sure about what I wanted feedback on and I wrote it on a piece of paper and left it by the side of my work. I wanted to gain feedback on how I could choose a final edit or at least a selection of images from the 20+ that I had printed for the session. 

Below are some photographs taken at the feedback session. David Oates a professional photographer from the industry was walking around the studios and giving constructive feedback to help progress each students work. I lay out all of my images over two tables, the images were mostly A3 size with a handful of smaller A4 prints. 





The above image is the set of photographs that I edited down to over the space of the full day, from help from the members from industry. I was very pleased to develop and edit down to such a strong set of images from what initially looked like a mixture of everything. The final images were very strong with a definite visual coherence.  

The feedback that David gave me was of great importance, he had a very in depth knowledge of how to build and construct a final series of images. I had a long talk with David and talked about my ideas and concepts behind the work as well as showing him my portraits from my previous body of work surrounding a similar topic. He asked me some tricky questions and was interested in what I wanted to show with the piece of work. I explained my concept and he asked me other questions to get more information from me. He could relate to the forge & metal working industry due to his upbringing and past employment, this was great for me because I think he had a real interest in my work.

David helped to me see that although it is not easy to see, there were in fact three different separate projects within the photographs that I had presented. He mixed up and made three different piles of images and said that he believed each of the piles had a different narrative and story behind them. He praised all of the work that I had done for the technical element but he wasn't sure that there was a definitive series of flowing images. This was just the sort of feedback that I needed and it helped me to have the chance to decide which series of images I would choose to become my final focus for my project. After some talking with David, I decided to stick with my heart and I chose the set of images that were most meaningful for me and the series of work that I had really enjoyed doing. I had passion for the chosen set of images. I decided to focus on the food and still life tool photographs, I had a great body of research behind it and it worked really well visually, giving for the professional quality of outcome that is expected from my FMP.

I also wanted feedback on my title for the body of work, I left a separate piece of paper next to my work with suggestions from the name of my piece of work, people left their individual ideas based on what they had seen, this was a great way to brain storm ideas for the name!

Overall, the whole session was a success, it really helped me to solidify my idea and it enabled me to have the drive to push forward with my work. I came out out of the session feeling inspired and I couldn't wait to start my work again!


Saturday, 12 April 2014

Link to Feedback

This blog post is linking what I have done to the feedback that I was given when I submitted my project proposal. I have decided to read back through my feedback in order to make sure that I am working upon what the tutors noticed about my proposal. I received 80% for my project proposal and project planner during the research assignment for my FMP, I was very happy with this and I am glad that all of my hard work paid off. One thing that really drove me to work hard for this project was that I am truly passionate about it and this made me want to get a great mark in the end after the hard work.

The first thing that I want to bring up from the feedback sheet is that they mention that producing a title for the body of work may be of benefit to me. I have kept this is mind and am always thinking of possible names that I can name my project. I have been asking the men who work within the forge every so often if they can think of any slang words that I would be interested in using. Something with great relevance and impact. I have not yet come up with a name and will continue to think of one. I think that the best way for me to get a suitable name is by waiting until the end of the project because then I will have the final images in front of me and I think it will come naturally. 

The feedback also mentions logistical access to other forges as I initially intended to photograph in other forges around the UK. I become obvious from near the beginning of the project that it wasn't necessary for me visit any other forges because it was possible for me to complete the project at the forge that I work at and have easy access to.  

The above points are the only things that I wanted to pull from the feedback and mention on this post. I just wanted to write this post so that I can be seen making use of the feedback and acting upon what was said in the feedback.

Monday, 7 April 2014

Learning Process

Throughout this project to date, I have noticed that I have been through a number of different thought processes and cycles. By this, I mean that I initially intended the body of work to be a series of portraits and other "real life" photographs. I then decided to focus on producing still life and purely focussing on food and close up detail photography. The process has now come back around and I now feel that the body of work would work most successfully as a mixture of both portrait, close-up, still life and a big part of it being surrounded by food photography. It has been very interesting seeing my project go through these cycles and it has made me open my mind photographically to letting a project flow naturally. 

Target Audience

The target audience for any exhibition & whole project is important, it is something that the photographer must have in his head at the very beginning of the project. I knew that as soon as I decided on the concept for my project that it would be with the intention for the gallery wall/ exhibitions. My work is very much revolving around the documentary theme within photography, even though this project has ended up looking less like a "typical" documentary piece due to the emphasis on food and still life photography. This means that my work along with most other documentary photographers best suits the gallery.

In terms of my subject matter I can imagine that due to me focussing on the metal working industry, an industry that is sadly in decline, my work is most likely to be aimed at men and women who can relate to this time gone by and therefore I am hopeful that they will be interested in my work or at least some people! I would however love for my work to be seen as a document and an archive of this once tremendous industry, and also to be a praise of the still surviving forges within the country who are still working within the same means as some hundred years ago. 

This work acts as an insight to people who may not be old enough to remember or have never heard about the metal working industry in the UK. The images depict life within one of the remaining forges and the subject matter and what is going on within the images is a spectacle of which I hope people of all ages will be able to appreciate. 

It has been important for me to keep my target audience in my mind throughout this project as it has helped me to keep my focus on track and although I might not have made sure that I keep my audience in my mind during previous projects it has defiantly been very worth while for me to do so during this project.

Post Production: Editing

Throughout my photographic career, I have never edited my photographs highly, I believe in making the image as perfect as possible when behind the camera to cut out unnecessary post-production. Saying this, when I need to apply further editing to images, I find myself capable of doing so.

I chosen to include the two below images in order to show some of the basic yet vital changes that enable my work to really come alive.


Edited Image


Original Image



Firstly, I did some colour corrections and then adjusted the tone and contrast of each image to suit. I then lightened/ darkened any areas of the photography that needed attention using the dodge and burn tool. I was careful not to over use this tool because it can lead to pixilation. Although each image needed slightly different changes, I was able make each image visually coherent with the others. 

If I came across something that needed to be changed with an image, I opted to choose the internet to provide me with tutorials as to how I could learn how to manipulate the images in Photoshop CS5.


Budget

In order to develop my professional photographic practice, I wanted to incorporate a real life budget into my work, I have decided to set aside an amount of money from my savings and student loan. This money will be for the physical outcomes of this project, for test prints, experimentation and final presentation. By setting myself a budget I aim to get myself ready for when I leave university and have to deal with real life clients on a regular basis.

The amount of money that I have set aside for the body of work is : £300- £400.

I imagine my final images to be of a large size, either A0 or A1. I want to keep a sense of fluidity throughout the photographs, in terms of the size and print quality. I am not going to let the money issues impact my work because I really want to strive to produce a body of work that really puts my point across to the best of its ability. 

As previously mentioned, my preferred printing company are called BPD Photech, below is a price list for their printing services. (I have chosen the paper sizes that I can see myself using for this body of work) (Price is per print)

http://www.photech.co.uk/

A0 (Gloss): £56.40
A0 (High Gloss): £60
A1 (Gloss): £35.90
A1 (High Gloss): £40
A2 (Gloss): £15.40
A2 (High Gloss): £20




I will also include the prices for another well respected printers called DS Colour Labs.

http://www.dscolourlabs.co.uk/

A0 (Gloss): £49.99
A1 (Gloss): £18.99
A2 (Gloss): £13.99  

DS Colour labs prices are really competitive compared to BPD Photech, I am going to visit their shops soon in order to see how good quality DS Colour Labs large format prints are. I know that BPD Photech will produce extremely high quality prints and am more than pleased with the genuine 1-to-1 tailored service/ experience that they produce. 

I will also include the prices for another well respected printers called MCL Photolab.

http://mclphotolab.com/index.php

A0 (Gloss): £49.95
A1 (Gloss): £18.95
A2 (Gloss): £13.95

Again, MCL Photolab are extremely competitive and actually seem to be the cheapest. I have never worked with this company, this may be something that I look into in the future.


Final Resolution: Paper Quality

Having been building up a rapport with several printing companies over my time at university, I have begun to realise which type of paper finish suits certain styles/ types of photograph. The final resolution of a photographic image is of massive importance to myself, I believe that for my practice high quality and sharp photographs have the most impact to the viewer. This impact then enables the viewer to form an opinion based upon what a photographer puts across in their images and through the chosen quality of finish. 

I was given a sample pack of paper finishes by a printing company called BPD Photech, my preferred printers. The pack gives small examples of the 5 finishes that they can produce: Gloss, High Gloss, Lustre, Fine Art and Metallic. 

For an exhibition that I produced around 5 months ago, I consciously decided to make use of the standard gloss paper finish, it seemed to be the most easy to view whilst still keeping the fine detail of the gloss finish. Although the high gloss seemed very clear and sharp, which worked well with the crisp images, I found that the high gloss gives a glare when placed under a light source and for that reason I chose to opt away from this. As for the lustre finish, it gives for a nice finish however for the majority of my work, I believe that it is to be exhibited in a gallery or show space and lustre doesn't seem to be used much at exhibitions from my experience. The is one use that I use lustre finish for and that is for editing down my photographs and choosing which to include in my final body of work. I find that the lustre finish can often be the cheapest and most easy to view when light is glaring off the print, this enable for a smoother editing down stage of post production. The other two finishes, fine art and metallic don't seen to favour my work and have never really appealed to me however, I believe that it would be worthwhile me printing on metallic paper purely as an experiment as I believe that it has some nice qualities about it. 

The photograph below shows an image of all of the above mentioned paper finishes. 



I am now going to submit my some of the photographs that I have taken so far to the printers, I will then hang my work in a space at university where peers and lecturers will be able to give me feedback on my printing choices as well as my chosen images at present. This is a great opportunity to get others feedback on the series of images as it progresses, I am always very open to anyone speaking about my work and really try to take on valid points that other mention to me. This is a great way to push forward my project and as I have done in the past, I will take people opinions and use them as a positive spring board to further develop. 

I chose to send a large number of photographs to print in order to be able to edit down to an interim final series. I chose that the prints would be most A3 size, this is purely because this is a large enough size to be able to see the beautiful visual clarity whilst also being able to move and change around the order of the prints with these good sizes of images. I will also dig out an A1 print that I had made for a previous exhibition, this will give the viewer a good enough representation of how I intend to present my photographs.